What Does The Spout Connector Do
What Does The Spout Connector Do. Basically, what the spout is is an electrical connector. Do you have to take it off to do the timing?
With the spout removed or circuit open, base time is set. The purpose of the spout connector is to complete the circuit to the distributor to allow the pcm to have timing control. With the spout inserted or circuit closed the computer adjusts timing.
I Set My Timing To 15* Maybe 16*, Its Hard To Tell From My Chalk Mark But It Runs Great, A Lot Smoother, But My Question Is About The Spout Connector, I Took It Off When Timing It.
It's a plug or connector wire in the tfi wiring. What does the spout connector do. The purpose of the spout connector is to complete the circuit to the distributor to allow the pcm to have timing control.
It Will Automatically Adjust Itself To The Base Timing When Plugged In.
Why do people say to take it off when you are doin the timing. If the tfi sees no spout pulses, the tfi will fire the coil strictly on the. You remove the spout connector to disable pcm.
What Does The Spout Connector Do?
And should it be plugged in? Any and every ford tfi system i've diagnosed that starts or runs better with spout disconnected is always a faulty pip sensor (profile ignition pickup). With the spout inserted or circuit closed the computer adjusts timing.
If You Don't Unplug The Spout And Turn The Distributor The Pcm Still Thinks Its At 10 And Can't Adjust.
You have topull it out before setting the timing. The spout connector, when removed, breaks the circuit that allows the ecm to advance the timing. The spout (spark output) is the signal from the eec to modify when the tfi module fires the coil.
All It Does It Complete The Circuit When Installed.
The spout (spark output) connector is the little plug on thewires going into the tfi module on the distributor. Do you have to take it off to do the timing? You need to remove it when.
Post a Comment for "What Does The Spout Connector Do"